CivilEdge Blog

New ASHTAS Installer B Temporary Road Safety Barriers: What the Course Covers and Who Needs It

Written by CivilEdge | 15 November 2026, 11:46:17 pm Z

CivilEdge now delivers the ASHTAS Installer B Temporary Road Safety Barriers course, in partnership with Lantra. The course trains accredited ASHTAS Installer A holders to install temporary road safety barrier systems, end treatments and transitions correctly and safely. Students complete theory training, a theory assessment and post-course e-logbooks, which are assessed by Lantra. On successful completion, students receive an ASHTAS Installer B e-card issued by Lantra.

What Is the ASHTAS Installer B Temporary Road Safety Barriers Course?

The ASHTAS Installer B Temporary Road Safety Barriers course is an accredited training module under the Austroads Safety Hardware Training and Accreditation Scheme (ASHTAS). It covers the installation of temporary (work zone) road safety barrier systems, the barriers used to separate road workers from live traffic and protect motorists from hazards during roadworks.

ASHTAS is the national scheme overseen by Austroads, with training and accreditation material developed and delivered by Lantra on behalf of Austroads and its members. Lantra lists Temporary/Work zone Road Safety Barrier as one of the public domain systems available at Installer B level, alongside W-Beam/Thrie-Beam, Wire Rope Safety Barrier (WRSB), Rigid Road Safety Barrier, and Terminals and Crash Cushions.

Where Does Installer B Sit in the ASHTAS Accreditation Pathway?

Installer B is the third step in the ASHTAS pathway and can only be completed once a student holds both the Operative and Installer A accreditations. Austroads describes the progression in this order:

  1. ASHTAS Operative: the entry-level accreditation for people working on the installation, repair and maintenance of road safety barriers.
  2. ASHTAS Installer A: installer theory covering the generic elements and practice of road safety hardware installation. Students must complete Installer A logbooks before moving on.
  3. ASHTAS Installer B: training for a specific road safety barrier type. This course is the Installer B module for temporary road safety barriers.
  4. Proprietary Installer courses: additional training on specific manufacturers' barrier systems, completed as applicable.

According to Lantra, accredited Installers are responsible for overseeing and mentoring Operatives within the road safety barrier crew. That makes Installer B a step up in responsibility, not just a new ticket.

Why Do Temporary Road Safety Barriers Need Accredited Installers?

Temporary road safety barriers only protect road workers and motorists if they are installed exactly as designed. A barrier with incorrect alignment, the wrong lateral offset or a poorly connected end treatment can fail on impact, putting the people behind it and the people driving past it at risk.

Austroads members and the road safety barrier industry have raised concerns about the quality of barrier installation, and ASHTAS was established to deliver nationally consistent training outcomes for everyone installing and maintaining road safety barriers in Australia and New Zealand. ASHTAS is mandatory across NSW, Western Australia, South Australia, Queensland and Victoria, with each state and territory adopting the scheme.

What Will Students Learn in ASHTAS Installer B Temporary Road Safety Barriers?

The course covers the full lifecycle of a temporary barrier installation, from understanding barrier system types through to handover. Topics include:

ASHTAS and the Role of the Installer

How the ASHTAS scheme works, what the Installer B accreditation means, and the responsibilities an Installer carries on site.

Types of Temporary Road Safety Barrier Systems

The categories of temporary barrier systems used in Australian work zones and the general principles that apply to all of them.

Longitudinal Alignment and Lateral Positioning

How to set out and install barriers along the correct line and at the correct offset from traffic and hazards, so the system performs as tested.

End Treatments: Crash Cushions, Terminals and Transitions

How barrier runs begin, end and connect to other systems, including crash cushions, terminals and transitions between barrier types.

Manual Handling and Safe Work Practices

The hazards of handling barrier units, including lifting, and the safe work practices that protect installers and road workers during installation.

Handover, Technical Conditions for Use (TCUs) and Course Assessment

Handing the completed installation over correctly, followed by the course theory assessment.

What Are the Entry Requirements for Installer B?

Students must meet all of the following before enrolling:

  • Be at least 18 years of age
  • Hold a current White Card
  • Hold an ASHTAS Operative e-card
  • Hold an ASHTAS Installer A e-card, with Installer A logbooks completed

Don't have Operative yet? Start with the ASHTAS Operative course.

How Is the Course Delivered and Assessed?

The course is delivered face-to-face or through blended online learning, combining theory training, class participation, a theory assessment and e-logbooks. Blended learning may be available across VIC, NSW, QLD, SA, TAS and WA.

After the course, students complete their e-logbooks. Lantra describes the e-logbook as a cloud-based system, accessed by computer or mobile phone, used to collect and assess evidence that keeps an individual's ASHTAS accreditation current. Installer B logbooks are assessed by Lantra.

On successful completion, students receive an ASHTAS Installer B e-card issued by Lantra. The e-card is a digital record of approved skills that can be shown on a mobile phone, so supervisors and principal contractors can verify accreditation on site.

When Is the Next Course and How Much Does It Cost?

Course detail

Information

Course

ASHTAS Installer B: Temporary Road Safety Barriers

Next date

 ASHTAS Installer B - upcoming courses 

Delivery

Online learning (face-to-face and blended options available)

Duration

3 hours inclusive of theory and assessment, plus post-course e-logbooks

Price

$500

Outcome

ASHTAS Installer B e-card issued by Lantra

Delivered by

CivilEdge (RTO 41594) in partnership with Lantra

How Can You Verify CivilEdge Is an Approved ASHTAS Training Provider?

Austroads lists CivilEdge as an approved training provider for both the ASHTAS Operative course and the Installer A and B courses. Lantra identifies, approves, oversees and audits every ASHTAS training provider, and you can confirm CivilEdge's status on Lantra's list of approved training providers or on the Austroads ASHTAS page.

ASHTAS Installer B Temporary Road Safety Barrier Training with CivilEdge

CivilEdge is a Registered Training Organisation (RTO 41594) and a Lantra-approved ASHTAS training provider, delivering the full ASHTAS pathway from Operative through to Installer B. Our trainers bring real-world industry experience to every session, so students learn how temporary barrier systems are actually installed on Australian worksites, not just how they look on paper.

Book your ASHTAS Installer B Temporary Road Safety Barriers course here or call our team on 1300 725 483.

With 15+ years in the industry and trainers drawn from real-world practice, CivilEdge delivers training that meets the highest industry standards across VIC, NSW, QLD, SA, TAS and WA. When it comes to safety, there are no excuses.